Wireless Quick Guide: LSU Overview
            
        
        
        
        
            This article has not been updated recently and may contain dated material.
         
        
        
            Have a myLSU ID?

	- 
	
	
		- Login with <username>@lsu.edu and your myLSU password. Don't forget the @lsu.edu- just your myLSU username will not work!
- After 3 failed sign-in attempts, you will be temporarily locked out for 15 minutes. After this, you can try logging in again.
- Make sure you are selecting eduroam, and if you are on an Android phone, make sure Authentication Protocol is MSCHAP-V2.
- If you see a prompt about a certificate, select Accept (or Trust).
- If you are having problems getting the logon box to display, you may need to Forget the Network:
		
		
- The minimum requirements for eduroam are Windows 10 or Mac OS High Sierra. If you need to update your device, please see the following articles:
		
		
- You may also view the full wireless articles below for additional help or more information.
		
		
 
 
No myLSU ID:
	- lsuguest:
	
	
	- Other Institution in eduroam:
	
		- Login with your school's username (username@[domain].edu) and password.
- Don't forget the @[domain].edu- just your school's username alone will not work!
- Please note that LSU does not provide support for non-LSU eduroam login issues. Please contact your institution's Service  Desk.
- If you are having problems getting the logon box to display, you may need to Forget the Network:
		
		
- eduroam Wireless: LSU Overview
 
 
Configuration 
	
		
			| BASIC SETTINGS | 
	
	
		
			| SSID (Network Name) | eduroam | 
		
			| Network Type | Infrastructure (or Access Point) | 
		
			| TCP/IP | DHCP | 
		
			| EAP Type | PEAP | 
		
			| Security | WPA2 Enterprise | 
		
			| Data Encryption | AES | 
		
			| Authentication Method/Protocol | MSCHAP-V2 | 
		
			| Inner EAP Type | EAP-MSCHAPv2 | 
		
			| Certificate Authority (CA) | AAA Certificate Services | 
	
 
	- Your Wireless Adapter MUST have support for WPA2 Enterprise and MUST be Wi-Fi Certified.
 
- Your Wireless Adapter MUST support the following Wireless Standards & Bands:
	
		- 802.11a/n (5GHz) & 802.11g/n (2.4GHz) - 802.11b is not supported
 
 
- WPA2 comes in two flavors: WPA2 Personal and WPA2 Enterprise.
	
		- It is important to make this distinction as the LSU Wireless Network will ONLY support the Enterprise Mode.
 
Troubleshooting
	- Try entering your password slowly and watch the keys as you type it. 
- Try turning Wifi off for one minute, and then try connecting again.
- If you still can't connect or need assistance, please contact the Service Desk at 225.578.3375 or servicedesk@lsu.edu.
- You may also view the full wireless FAQ at Wireless: Common Issues & Frequently Asked Questions for more specific and advanced troubleshooting.
 
 
         
        
            
            19658
            
            
            3/18/2024 12:30:12 PM